PDA

View Full Version : How to get into the programming menu of the Motorola Triumph to turn on DIAG



srmuc69
07-21-2011, 01:47 PM
Hello,

I got the new Motorola Triumph and I would like to look at it via the CDMA Workshop but for that I need to turn on the DIAG mode, e.g. enable the USB to serial port so that a COM port shows up. The Droid X etc work via ##PROGRAM but that does not work on the triumph. Any idea how to do that?

I also found that this info app works on the Triumph:

*#*#INFO#*#*

Thanks
SR

srmuc69
07-24-2011, 03:28 PM
Ok, I found that one, e.g. use the program AnyCut from the market place and create a new shortcut thru any activities and scroll down to "Select COM Port Mode". Once the shortcut is on the home screen you can set the DIAG on. Then the modem is found and also a port shows up in the device manager. Then you can read the phone using QPST and QXDM with the latest versions only.